(908) 273-6360

Polymers - PP, HDPE, PC, PVC, TPU, PA, PEEK, LCP, EVA, PS & more


Plastics and other types of polymers are often soft and elastic materials that do not respond well to impact milling.  These heat sensitive solids soften, smear or melt if mechanically milled ambiently, leaving cryogenic size reduction as the only option. However, another method indeed exists.

The Mikro® UMP Attrition Mill is a high speed cutting mill designed for the fine size reduction of plastics, polymers and fibrous materials that do not respond well to other forms of impact milling.  The UMP Attrition Mill is designed to grind heat sensitive and soft materials without the need for liquid nitrogen or chilled air.  When coupled in circuit with a Hosokawa Air Classifier, size reduction as low as D97 < 75 µm is achievable. The mill is available from lab to production sizes up to 60 HP. Size reduction capability to D97 in the 200 to 500 µm range when coupled with a screener. Capable of ultra-fine milling to D97 <75 µm when coupled with a Hosokawa Classifier in closed-loop milling circuit.


Common Applications
Particle Size

Polypropylene (PP)

97% < 297 µm

Polyethylene (HDPE)

97% < 212 µm

Polycarbonate (PC)

97% < 297 µm

Polyvinyl Chloride (PVC)

97% < 297 µm

Thermoplastic Polyurethane (TPU)

97% < 212 µm

Polyamide (PA) Nylon

97% < 297 µm

Polyetherketone (PEEK)

99% < 74 µm

Liquid Crystal Polymer (LCP)

97% < 106 µm

Ethylene Vinyl Alcohol (EVA)

97% < 250 µm

Acrylonitrile Butadiene Styrene (ABS)

97% < 250 µm

Polystyrene (PS)

97% < 250 µm



Other Applications

Thermoplastic polyurethane (TPU)

Polysulfone (PSU)

Polystyrene (PS)

Polyethylene Terephthalate (PET)

Polyvinyl alcohol (PVOH)

Thermoplastic polyurethane (TPU)

Polyester (CPET)



Ethylene vinyl alcohol (EVA)

Liquid crystal polymer (LCP)

Low Density Polyethylene (LDPE)

Polyetherimide (PEI)

Polyethersulfone (PES) resin

Poly-paraphenylene terephthalamide

Nitrile Rubber (NBR)

This site is best viewed in portrait mode.
Please rotate your screen back!